Panasonic AG-710P Operating Instructions Manual page 19

Correction
* Check that the POWER switch is set to on.
* Check the DEW indicator. If it is displayed, the unit will not
No operation starts when operation buttons are pressed...
Recording & Playback
TV program can't be recorded...
There is no playback picture, or the playback picture is
noisy or contains streaks...
During special effects playback, the picture may contain
some vertical jitter when using a TV which has an
Automatic Vertical Hold Control...
If the top of your playback picture waves back and forth
excessively...
Miscellaneous
Video cassette can't be inserted...
Video cassette can't be removed...
Video cassette ejects when the REC and PLAY buttons
are pressed...
operate.
Correction
Check the connections between the VCR and your TV.
Check that the band selected matches your antenna or
cable TV system.
Make sure that the record tab on the back of the
cassette is still intact. (P.14)
Adjust the TRACKING contro! slowly in either direction.
(P.10) -
Video heads are clogged. (P.14)}
Set the TV's Vertical Hold Control to "MANUAL" and
then adjust it.
Because the VCR playback signal is not as stable as an
off-the-air TV signal, the top of your TV screen may be
bent or unstable during playback. To solve this problem,
slowly turn the horizontal hold control on your TV to
correct the wavy picture. If your TV does not have a
horizontal hold contro! or adjusting the control does not
help, please contact your local TV service center.
Correction
¢ Insert the cassette with the window side up and the record
tab facing you.
¢ Check that the power piug is completely connected to an
AC outlet.
* Make sure the record tab on the back of the cassette is
Still intact. (P.14)
19