Recording Tapes - Pioneer A-88X Operating Instructions Manual
Hide thumbs
Also See for A-88X:
- Service manual (23 pages) ,
- Operating instructions manual (13 pages) ,
- Operating instructions manual (12 pages)
Table of Contents
Advertisement
OPERATIONS
TO LISTEN TO TAPES:
(1) Set the amplifier and tape deck POWER
swit-
ches to ON.
®
To listen to the tape deck connected to TAPE 1 PLAY ter-
minals:
—Set to [TAPE 1].
©
To listen to the tape deck connected to TAPE 2 PLAY ter-
minals:
—Set to [TAPE 2].
(3) Operate the tape deck to begin tape playback.
(4) Adjust the volume with the unit's VOLUME
control.
RECORDING TAPES:
e
While listening to AM/FM
broadcasts, records, compact
discs,
or
the
component
connected
to
the
VIDEO
SOUND/AUX 1 and AUX 2 terminals, you can record these
same sounds on tape merely by setting your tape deck to
the recording mode.
e
Refer to the operating instructions for your tape deck for
proper operating procedures.
NOTE:
When performing normal recording, be sure to set the TAPE
COPY
switch to the [OFF] position. Normal recording is not possible when
the switch is set to any other position.
TO
LISTEN
TO
THE
COMPONENT
CON-
NECTED TO THE CD, VIDEO SOUND/AUX
1
and AUX 2 TERMINALS:
(1) Set the POWER switches of the amplifier and
component to be used to ON.
(2) Set the FUNCTION switches as desired.
¢
To listen to a compact disc player:
—
Press [CD].
e
To
listen
to
a component
connected
to the
VIDEO
SOUND/AUX
1 terminals:
— Press [VIDEO/AUX 1].
e
To listen to a component
connected
to the AUX 2 ter-
minals:
— Press [AUX 2].
(3) Operate the component to begin playback.
(4) Adjust the volume
with
the unit's VOLUME
control.
Cl)
(2) (4)
TAPE COPY switch [OFF]
MONITORING SOUND DURING RECORDING
When a three-head tape deck is used for recording, the sound
actually being recorded can be listened to to check the tone
and recording levels. This is called ''monitoring'' the sound.
When monitoring a recording, set the tape monitor switch to
match the tape deck being used to perform the recording.
e
When recording on the tape deck connected to the TAPE 1
REC terminals:
— Set to [TAPE 1].
e
When recording on the tape deck connected to the TAPE 2
REC terminals:
— Set to [TAPE 2].
TAPE MONITOR
switch.
Advertisement
Table of Contents
