Table of Contents
Advertisement
One Channel Map
(Depending on model)
• If set to 'Enable' , the TV will operate as below.
- When the TV is auto-scanning, it searches both air and cable channels.
- User can assign a channel number him/herself by manual scan.
- In 'Programme Edit' window, all channels are shown in a single list regardless of input source.
- Automatically scanned channels may not have the user-desired channel numbers.
• If user change the 'Enable/Disable' value, an pop-up window will be displayed to warn that all channel will be deleted. The Default value is 'Enable' .
DTV Programme Update
• It is a mode to set whether to update DTV programme automatically or not.
• When set to 'Auto' , the function to update TV' s programme map according to DTV programme' s stream information.
• When set to 'Manual' , the function to keep TV' s programme map even though DTV programme' s information is changed.
On Timer Operation
• It is a mode to select Timer Power On working one time or repeatedly.
• 'Once': 'Timer Power On' in the user menu operates only one time when the Timer Power On menu is set to On.
• 'Repeat' : 'Timer Power On' operates repeatedly when the Timer Power On menu is set to On.
31
Advertisement
Table of Contents
