ASROCK TRX50 WS User Manual page 9

• 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)***
• 3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan
Speed Control)****
• 1 x 24 pin ATX Power Connector (Hi-Density Power Con-
nector)
• 1 x 3 pin ATX Power Connector*****
• 2 x 8 pin ATX 12V Power Connectors (Hi-Density Power
Connector) (for Motherboard)******
• 2 x 6 pin PCIe 12V Power Connectors (Hi-Density Power
Connector) (for Motherboard)******
• 1 x 6 pin Graphics 12V Power Connector (Hi-Density Power
Connector) (for PCIe card)*******
• 1 x Front Panel Audio Connector (15μ Gold Audio
Connector)
• 1 x Thunderbolt AIC Connector (5-pin) (Supports ASRock
Thunderbolt 4 AIC Card)
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
• 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)
• 1 x Front Panel Type C USB 3.2 Gen2 Header (10 Gb/s)
• 1 x Dr. Debug with LED
• 1 x Power Button with LED
• 1 x Reset Button with LED
* Support in total up to 5V/3A, 15W LED Strip
** CPU_FAN1 supports the fan power up to 1A (12W).
*** CPU_FAN2/WP supports the fan power up to 2A (24W).
**** CHA_FAN1~3/WP support the fan power up to 2A (24W).
***** Plug the Multi PSU Adaptor Cable that comes with the
package to ATX_CON1 if you use a secondary PSU.
****** It is required to connect both ATX12V1 and ATX12V2;
otherwise, the system may not boot up properly.
****** It is required to connect all 8 pin and 6 pin 12V Power
Connectors when overclocking.
******* It is required to connect a 6 pin PCIE 12V power cable to
GFX_12V1; otherwise, the system may not boot up properly.
BIOS • AMI UEFI Legal BIOS with GUI support
Feature
TRX50 WS
5