Image Protection - Sony DCR-PC110 Operating Instructions Manual

Preventing accidental erasure
- Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a "MemolTyStick" into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the right (unlock) position.
(2) Select the image you want to protect.
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select D, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PROTECT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(7) Press MENU to make the mentl display disappear. The "o---,,"mark is
displayed beside the data file name of the selected image.
MENU
5
6
_IEMORy SET 0FF10/12_2_
STILL SEt
3"Er71sll
p_,mT M!,RK
,_, SLIDE SHOW
_,_ 9ELETE ALL
FORMAT
_ETURN
pRiNt M!,_, K
_, SL_DE SHOe, '
_,_ DELETE ALL
FORMAT
_RETURt_
To cancel image protection
Select OFF in step 6, then press the SEL/PUSH EXEC dial.
Note
Formatting erases all infbrmation on the "Memory Stick," including the protected
image data. Check the contents of the "Memory Stick" befbre fi0rmatting.
If the write-protect tab on the "Memory Stick" is set to LOCK
You cannot carry out image protection.
134