Table of Contents
Advertisement
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
wireless
card.
4. Remove the
display
assembly.
5. Remove the
display hinge
6. Remove the
display
bezel.
About this task
NOTE:
This procedure applies only to computers with a plastic chassis.
The following images indicate the location of the display hinges and provide a visual representation of the removal procedure.
Steps
1. Remove the three screws (M2.5x3.8) that secure the left display hinge to the display panel and back cover.
2. Lift and remove the left display hinge from the display assembly.
3. Remove the three screws (M2.5x3.8) that secure the right display hinge to the display panel and back cover.
4. Lift and remove the right display hinge from the display assembly.
Before working inside your
caps.
computer.
Removing and installing Field Replaceable Units (FRUs)
91
Advertisement
Table of Contents
