Configuring The Device - National Instruments NI ELVIS III Getting Started

9. Click Save to save the settings.
If the connection is successful, you can see the IP address of the wireless network
connection on the OLED display of the NI ELVIS III. Press and hold the user
programmable button on the left-hand side of the NI ELVIS III workstation until
you turn on the display. The IP address of the wireless network connection appears
after the icon.
Tip
Go to
environment.
Tip
Go to
the device or set up an administrator password.
14
ni.com
Setting up the Host Computer

Configuring the Device

to set up the software
if you need to upgrade the software on
NI ELVIS III Getting Started