Smartgrid; Remote Control - Miele TXR 860 WP Operating Instructions Manual

SmartGrid

The SmartGrid setting is only visible if
the Miele@home
activated.
This function can be used for starting
your tumble dryer automatically at a
time when your energy costs are most
economical.
Activating SmartGrid
button a new function. Use the "delay
start" button to set the
tumble dryer will then start within the
timeframe specified when it receives a
signal from the energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the tumble dryer will start automati-
cally (see "Delay start").
SmartGrid is deactivated as standard.
setting is set up and
gives the delay start
SmartGrid . The

Remote Control

The Remote Control
ble if the Miele@home
and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your tumble
dryer from anywhere and start it re-
motely. You can also control it re-
motely via the MobileStart function.
You can switch off the
setting if you do not want to operate the
dryer with your mobile device.
If
Remote Control
app can cause the program to be can-
celed.
Use the "Delay Start" button to set a
time at which you wish to start the tum-
ble dryer and start the delay start (see
"Delay start/SmartStart").
The tumble dryer will then start within
the timeframe specified when it receives
your signal.
If it has not received a start signal by
the latest start time set, the tumble
dryer will start automatically.
Remote control is activated by default.
Settings
setting is only visi-
setting is set up
Remote Control
is not switched on, the
93