Advertisement
OIL DRAINING PROCEDURE
23"SNO-AWAY
1.
Depress the handles toward the ground to effect a tilting
of the engine, and. place a block or support under the blower
housing to keep it tilted.
2-
Remove the pipe cap from tha end of the oil drain elbow.
3, Thread the plastic oil filler tube #153481 over the threaded
end of the elbow'until the threads of the elbow cut threads
into the plastic tubing.
4.
When the plastic tubing is firmly over the threaded end of
the elbow, return the Sno-Away to its normal attitude and
allow the oil to drain into a suitable container.
5- Refer to engine manufacturers manual for proper grade and
volume of oil for refilling engine crankcase.
2G" SHO-AWAY
1.
Depress the handles toward the ground to effect a Lilting
of the engina, and, place a block or support under the blower
housing to keep it tilted.
2- Remove the pipe plug from the oil drain elbow.
3- Thread the plastic oil filler tube #154381 into tha opening
in the elhow until the threads of the elbow cut threads on the
plastic tubing.
4.
When the plastic tubing is firmly in the elbow, return the
Sno-Away to its normal attitude and allow the oil to drain
into a suitable enntoiner.
5. Refer to engine manufacturer's manual for proper grade
volume of oil for refilling engine crenkcaae.
WARRANTY
The company warrants Simplicity Products to be free from defects in material and workmanship except
the company makes no warranty express or Implied with respect to tires* engines and engine accesso¬
ry which generally are warranted by their respective manufacturers, Amy part covered by fhflw war¬
ranty which is proven defective within one year, under normal use, from date of purchase* will be re¬
placed free of charge, f»o.h» Port Washington, Wisconsin* provided such part is returned to factory
transportation charges prepaid and is found to be defective upon examination at the factory. The com¬
pany la not obligated under this warranty to bear cost of labor or delivery charges in replacement of
defective parts. This warranty does not apply to any Simplicity Products .altered outside of Simplicity's
factory. Such replacement of defective parts shall be the exclusive remedy and In no event shall Sim¬
plicity be liable for consequential damages. EXCEPT AS SPECIFICALLY PROVIDED HEREIN* THERE
ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON ANY SIMPLICITY PRODUCT*
G
Advertisement
