Whirlpool 3LSR6233EQ1 Use & Care Manual page 6

OPERATING YOUR WASHER
U
SING YOUR WASHER (
4.
(OPTIONAL STEP) Pour measured liquid fabric
Dilute liquid fabric softener by filling the dispenser
5.
Close the washer lid.
6.
Turn the Load Size selector to the correct setting
turning the selector to a different setting. If your
washer has a RESET option, first move the
selector to RESET, then to the new water level.
6
.)
CONT
softener into the
liquid fabric softener
dispenser.
•
Do not spill or drip
any fabric softener on
the clothes.
•
Make sure you use
only liquid fabric
softener in this
dispenser.
with warm water until
liquid reaches the
crossbar in the opening.
•
Softener is added
automatically during
the rinse portion of
the cycle.
for your wash load and
the type of fabric being
washed.
•
Choose a load size
that allows the load to
move freely for best
fabric care. See the
"Loading" section.
•
Change the setting
after the washer has
started filling by
7.
Set the Water Temperature selector to the correct
Your model may have either a CLEAN TOUCH* or
Warm Cold
Wash
Cold Cold
Rinse
•
Follow garment label instructions.
HOT: 49°C (120°F) or above
– Whites and pastels
– Heavy and greasy soils
WARM: 32° to 44°C (90° to 110°F)
– Bright colors
– Moderate to light soils
COLD: 21° to 32°C (70° to 90°F)
– Colors that bleed or fade
– Light soils
setting for the type of
fabric and soils being
washed.
rotary knob Temperature
selector.
•
Use the warmest water
safe for fabric.