Adjusting Multi Slots - Alesis VX49 User Manual

Adjusting Multi Slots

Use the following VX49 controls to adjust the volume,
panning, solos, and mutes for each slot in a multi. The 8
slots correspond to the 8 encoders, switches, and pads.
•
To solo a slot, press its switch. The S button will
light up in the display and its pad will flash. Any
unsoloed slots' pad lights will turn off.
•
To mute a slot, press its pad. The M button will
light up in the display, and its pad light will turn off.
•
To adjust the volume of a slot, turn its encoder.
The meter will move in the display.
•
To adjust the panning of a slot, press Shift and
turn its encoder. The panning knob will move in the
display.
•
To switch between each view of 4 slots, use the
Page Left/Right buttons. Note that you are always
controlling all 8 slots in Multi Mode, regardless of
which 4 slots you are viewing.
Important: You can still make normal Multi Mode adjustments to all 8 slots even while you are in Multi Edit
Mode. Not all of the parameters will be shown in the display, but they are visible in VIP (and when you return
to the normal Multi Mode).
42