Technics SL-PD887 Operating Instructions Manual page 12

Using the remote control
transmitter BEE
RECALL
To confirm the selections to be deleted
Each time you press RECALL, the display
shows the selected disc and track number in
the sequence you have entered.
Track to be deleted Order you have
entered
To clear a selection to be deleted
CLEAR Press CLEAR.
Each time you press CLEAR, you will cancel
last entry in the order you have entered.
To clear a selection in the middle of the se-
quence, press RECALL repeatedly until the
display shows the selection to be cleared, and
then press CLEAR within three seconds after
the last press.
12
The changer plays the first tracks on all the loaded discs in se-
quence, followed by the second tracks on ail the discs, and so on.
(Refer to the illustration below.)
SPIRAL
Example: When starting from disc 1
Spiral play
[Track 2]
Cece Lack T}
Press SPIRAL.
Spiral play will begin with the first track on the
disc situated at the playing position.
— ¢ i y
CaP /\\
Cy C3
(iuminates
The changer will stop automatically when all the tracks on all
discs have been played once.
For your reference:
When a disc with fewer tracks finishes playing, that disc will be
skipped and the changer will continue playing the remaining
track on the other discs in spiral sequence.
To cancel spiral play mode
SPIRAL Press SPIRAL again.
The "SPIRAL" indicator will go out.
The changer will return to sequential play
mode from the current track on the current
disc which is playing.