Setting Language - Toshiba SD-K531 User Manual

Setting language

You can select the language of "Menu", "Subtitle" and "Audio" if their languages
are recorded onto the disc more than one language.
Setting language
1 Press SETUP in the stop mode or No Disc.
Press or to select "Language".
VCR MENU
SETUP
SET +
CH – CH +
ENTER
SET –
2
Press or ENTER, then press
desired langugage item.
SET +
CH – CH +
ENTER
SET –
3
Press or ENTER.
Press or to select your desired language,
then press ENTER.
SET +
CH – CH +
ENTER
SET –
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see "Language code
list" on page 67).
Original: (Audio)
The unit will select the first priority language of each
disc.
Automatic: (Subtitle)
• The unit will automatically select the same language in
the AUDIO setting.
• When the unit selects the same language as the AUDIO,
the subtitles will not appear during playback.
• When you do not use the same language as the AUDIO,
the subtitles will appear during playback.
Off: (Subtitle)
Subtitles do not appear.
J2D81701A (E)p62-67.p65
Language Picture Sound Parental Other
/Enter/Setup/Return
or to select
Language Picture Sound Parental Other
Menu English
Subtitle Automatic
Audio English
/Enter/Setup/Return
Language Picture Sound Parental Other
Menu English English
Subtitle Automatic Francais
Audio English Espanol
Other
/Enter/Setup/Return
65
4 To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
VCR MENU
SETUP
RETURN
Note:
If the selected language is not recorded on the disc, the first-
priority language is selected.
28/5/04, 1:42 PM
SETUP
RETURN
ENTER
L / M / /
65