Table of Contents
Advertisement
Touch Function Control
Before using the touch function, ensure the USB Type B to Type A cable is
connected to your computer and the Windows operating system is running.
When using the touch function, please note:
• The touch function may need about five (5) seconds to resume if the USB
cable is removed and plugged in again, or the computer resumes from
Sleep Mode.
• The touchscreen can only detect up to ten (10) fingers simultaneously.
• If the Windows' cursor does not accurately follow your finger when you
touch the screen, do the following:
1. Open: Control Panel > Hardware and Sound >Tablet PC Settings
2. Select Calibration.
3. Follow the instructions to recalibrate your screen.
19
Advertisement
Table of Contents
