Display In Q Mode - Pentax WG-90 Start Manual

* 6 and 7 are only displayed when the shutter release button is pressed half-way.
* For 8, M is displayed when Pixel Track SR is set to O (On) on the [A Rec.
Mode] menu. f is displayed when the shutter release button is pressed
halfway if Pixel Track SR is set to P (Off) and there is a danger of camera
shake.
* For 13, when the focus mode is set to = and the Auto Macro function is
activated, q appears on the display (p.40).
* 15 appears for two seconds after the camera is turned on.
* 17 changes depending on [D-Range Setting] settings in the [A Rec. Mode]
menu. No icon is displayed on the screen when [Highlight Correction] and
[Shadow Correction] are both set to [Off].
* When the shooting mode is b (Auto Picture) and if you press the shutter
release button halfway, the automatically selected shooting mode appears in
A1 even when "No Info" is selected.
* If there are overexposed highlight areas in the image, they will blink red on the
display, and if there are underexposed shadow areas, they will blink yellow.
* Some indications may not appear depending on the shooting mode.

Display in Q Mode

The display shows the shooting information of the image in playback mode. The
display changes in the following sequence each time you press the 4 button:
Normal Display/Histogram + Info in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. In "Normal
Display", A1 to A9 are displayed. In "Histogram + Info", B1 to B8 are displayed as
well.
A1
A2
A3
A4
B1
B2
A5
1 / 2 5 0 1 / 2 5 0 1 / 2 5
F 3 . 5 F 3 . 5 F 3 .
Edit Edit Edit
12 12
M M
B5 B6
100 - 0038 10 100 - 003
0038
AWB AWB WB 200 20 200
ISO IS ISO
B7 B8
A6
A7
A8
A9
B3
B4
13