Technical Specifications - TomTom Mobile 5 User Manual

Wireless gps receiver
Hide thumbs Also See for Mobile 5:
Table of Contents

Advertisement

6. Technical Specifications

User interface
On/Off button
Green LED GPS Status
Red/Amber LED Power Status
Bluetooth connection
Please refer to the Bluetooth connection setup instructions in the documentation that comes with your PDA,
Smartphone or laptop. You will need to set up a Serial Port connection between the GPS receiver and your
device. The GPS receiver will appear to your device as the "TomTom Wireless GPS MkII" and its GPS
signal will be output on its "GPS serial output". To ensure ease of use, create a Bluetooth bond between your
device and the GPS receiver. The pairing code is 0000. Please check specific device setup information on
our support pages at www.tomtom.com.
After setting up the Bluetooth connection, you will need to modify the properties of the software on your
PDA, Smartphone or laptop to use the GPS signal from the GPS receiver. Please refer to the documentation
Configuring your
of your device, and of your software. Choose the NMEA protocol.
software
Mechanical
Size
Weight
Power
Battery
Battery life
Charge time
Voltage
Charging
GPS
Chipset
Frequency
C/A Code
Channels
Tracking sensitivity
Update rate
Cold start
Warm start
Hot start
Reacquisition time
Datum
Protocol
Antenna
Bluetooth
Profile
Class
Default PIN
Environmental
Storage Temperature
Operating Temperature
Humidity
Drop
Fluid & Dust Protection
Press & hold for 1s to switch on/off
Press & hold for 3s to perform reset
Solid on: Acquiring GPS Fix
Flashing Green: Has GPS Fix
Solid Red: Battery Low
Solid Amber: Battery charging
87.8 x 43.0 x 15.1 mm
68g
1200mAh Lithium Ion built-in cell
10hours typical use
Less than 4 hours
4.75V to 6V
From CLA (cigarette lighter adaptor) or AC Adaptor
SiRF Star III
L1, 1575.42MHz
1.023 MHz Chip Rate
20 channel all-in-view tracking
-159dBm
1Hz
<1 minute typical
<30 seconds typical
<10 seconds typical
<1 second from max 30second blockage
WGS-84
NMEA 0183 Version 2.2
Built-in omnidirectional antenna
Serial Port Profile (SPP)
Class II Version 1.2
0000
-20 to +70 degrees Celsius
-10 to +60 degrees Celsius
Up to 75% non-condensing
2m onto concrete
IP54
11/11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mk ii

Table of Contents