TP-Link RE220 User Manual page 10

Chapter 2
If the LED does not turn solid on, try again or refer to
Browser.
3. (Optional) If the extender connects to a dual band router, repeat steps 1 and 2 above
to connect to the other band.
Note:
1. For some early firmware versions, the extender share the same network name as your router.
2. If you want to customize the extended network name, refer to
4. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED
relocate the extender closer to the router to achieve better signal quality.
Tips:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
5. Enjoy! Connect to the extended network and enjoy the internet.
Method 2: Via the TP-Link Tether App
Solid On
Router
Halfway
Set Up Internet Connection
or Method 3: Via a Web
Configure Wireless Network.
turns solid green. If it doesn't,
Suitable location
Too far from router
No connection
Devices
7