Table of Contents
Advertisement
Make sure that recording is not being carried out before performing the following operations.
Remote control
MULTI
SOURCE
INPUT SELECTOR
Co)
CO
TUNER
Co
Remote control
C3
Co)
COC)
VIDEO-1 VIDEO-2 VIDEO-3
Remote control
SPEAKERS
MAIN
REMOTE
Co
CO
SPEAKERS
MAIN
REMOTE
NOTES:
30
The Surround mode becomes Bypass when the multi-source is used.
PHONO
cD
4
1. Turn the MR OFF button off.
MR OFF indicator is turned off.
. Press the MULTI SOURCE button.
REC OUT > indicator will be turned off and the
MULTI SOURGE|
indicator will flash for 8 seconds.
. While this is flashing, use the Input Selector button to select
the desired source.
If the tuner is selected with MULTI SOURCE and the Input
Selector is set to something other than TUNER, the tuners fre-
quency and group displays will be shown for 3 seconds.
When
changing the source, be sure to press the MULTI
SOURCE
button before pressing the Input Selector button.
Pressing the Input Selector button without first pressing the
MULTI SOURCE button will change the source in the main
room.
. Adjust the level using the MULTI SOURCE LEVEL
A/
V buttons on the remote control.
MULTI and the level will be indicated on the display for three
seconds, the indication for the sub room output level ranges
from the minimum of (-- ce dB), —78, -77, ... -I, to the maxi-
mum of (0 dB). It is recommended that the level be set lower in
advance in the main room (to about —66 dB).
. Press the SPEAKERS
REMOTE
button to illuminate the
REMOTE indicator.
Press the MAIN button to turn off the MAIN indicator if you
are not listening to the sound in the main room.
Pressing the REC OUT button will turn off the Remote speakers.
If the multi source is selected, MR OFF will automatically be deactivated.
Advertisement
Table of Contents
