TAILLIGHT / BRAKELIGHT LAMP REPLACEMENT
1. Remove the harness connector
from the back of the light assembly
q
.
2. Turn the lamp counter-clockwise to
remove it.
3. Apply dielectric grease to the socket
and install the new lamp.
4. Reinstall the harness connector
5. Test the light for proper operation.
SPARK PLUGS
SPARK PLUG RECOMMENDATIONS
Refer to the specifications section for the recommended spark plug type and
gap for your vehicle. Torque spark plugs to specification.
Using non-recommended spark plugs can result in serious engine damage.
Always use POLARIS-recommended spark plugs or their equivalent.
PLUG CONDITION
New Spark Plug
Previously Installed Spark Plug
w
w
.
NOTICE
TORQUE SPECIFICATION
MAINTENANCE
18-20 ft-lbs
(24-27 Nm)
18-20 ft-lbs
(24-27 Nm)
93