Error Messages (Examples) - Toa NX-100 Operation Manual

4. ERROR MESSAGES (EXAMPLES)

• "OO" connection failure. - Maximum number of connectable
PCs exceeded.
• No start. - Designated unit busy.
• "OO" contact output "XX" already ON.
• "OO" contact output "XX" turned OFF by other contact or PC.
• "OO" connection failure.
• Connection failure to all designated units.
• "OO" connection failure - Incomplete broadcast.
• No broadcast. - Connection failure to all units.
• Interrupted broadcast to "OO".
• Interrupted broadcast from "OO".
• "OO" connection failure. - Invalid system name.
• No start. - Invalid broadcast setting contents.
• "OO" contact output "XX" set to OFF.
Note
In the above messages, "OO" indicates a unit's name and IP address, and "XX" indicates the channel
number.
Message Points to Check
Quit operations, and then restart after a
few minutes.
Contact system
personnel.
management
200406