Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Adjusting the Monitor ..................... 5 Monitor Overview ....................6 Connecting the Monitor to PC ................8 OSD Setup ........................9 Navi Key ........................9 Hot Key ........................9 OSD Menus........................
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor MAG 323UPF Documentation Quick Start Guide Stand with Screw(s) Stand Base with Screw(s)
Installing the Monitor Stand 1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove. 2. Tighten the stand bracket with screws. 3. Connect the base to the stand and tighten the base screw to secure the base. 4.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. -5° 20° 100 mm 45° 45°...
Page 7
Macro Key To activate OSD Application. Power Button & Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. Cable Routing Hole Navi Key Power Jack...
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5.
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/ Down/ Left/ Right: ∙...
OSD Menus ⚠ Important The following settings will be grayed out when HDR signals are received: ∙ Night Vision ∙ Contrast MPRT Sync Color Temperature ∙ ∙ Low Blue Light Optix Scope ∙ ∙ HDCR PIP/PBP ∙ ∙ Brightness ∙ G.I.
1st Level Menu 2nd/3rd Level Menu Description Smart Crosshair Icon None ∙ Through AI algorithm, this function enhances the visibility of in-game crosshair. ∙ Users can select the color and position of the crosshair. Color White Auto Position Reset Optix Scope Scope Size Small ∙...
Page 12
1st Level Menu 2nd/3rd Level Menu Description Response Time Normal ∙ Setting to Fastest will reach the shortest response time and help improve blurred images Fast when playing very fast games. Fastest MPRT Sync ∙ MPRT is available when the refresh rate is over 85 Hz.
Professional 1st Level Menu 2nd Level Menu Description Pro Mode ∙ Use Up or Down Button to select and preview mode effects. User ∙ Press the OK Button to confirm and apply your mode Anti-Blue type. ∙ The default setting “Eco” mode meets the Movie requirements of TÜV Rheinland’s “Low Blue Light”...
1st Level Menu 2nd/3rd Level Menu Description Contrast 0-100 ∙ Properly adjust Contrast to relax your eyes. Sharpness ∙ Sharpness improves clarity and details of images. Color Temperature Cool ∙ Use Up or Down Button to select and preview mode effects. Normal ∙...
PIP/PBP 1st Level Menu 2nd/3rd Level Menu Description ∙ PIP (Picture in Picture) allows users to simultaneously display multiple video sources Source HDMI™1 on one screen. One program is displayed on the full screen at the same time as one or more HDMI™2 other programs are displayed in inset windows.
Navi Key 1st Level Menu 2nd Level Menu Description ∙ All Navi Key items can be adjusted via OSD Menus. Down Brightness Left Game Mode Right Smart Crosshair Alarm Clock Input Source PIP/PBP Mode Refresh Rate Info. On Screen Night Vision Optix Scope Setting 1st Level Menu...
Page 17
1st Level Menu 2nd Level Menu Description Power Button ∙ When set to OFF, users can press the power button to turn off the monitor. Standby ∙ When set to Standby, users can press the power button to turn off the panel and backlight. Info.
Specifications Monitor MAG 323UPF Size 32 inch Curvature Flat Panel Type Rapid IPS Resolution 3840 x 2160 (UHD) Aspect Ratio 16:9 ∙ Typical SDR: 440 nits Brightness ∙ Peak HDR: 600 nits Contrast Ratio 1000:1 Refresh Rate 160Hz 1ms (GTG)
Page 19
Monitor MAG 323UPF ∙ Plate Type: 100 x 100 mm ∙ Screw Type: M4 x 10 mm VESA Mounting • Thread Diameter: 4 mm • Thread Pitch: 0.7 mm • Thread Length: 10 mm Dimension (W x H x D) 727.1 x 494.9 x 233.7 mm...
Preset Display Modes ⚠ Important All information is subject to change without prior notice. Standard Mode Standard Resolution HDMI™ DP/ USB-C 640x480 @60Hz @67Hz @72Hz @75Hz SVGA 800x600 @56Hz @60Hz @72Hz @75Hz 1024x768 @60Hz @70Hz @75Hz SXGA 1280x1024 @60Hz @75Hz WXGA+ 1440x900 @60Hz...
Page 21
Standard Mode Standard Resolution HDMI™ DP/ USB-C Video Timing Resolution 480P 576P 720P @60Hz @120Hz 1080P @60Hz @120Hz 2160P @30Hz @50Hz @60Hz @120Hz * Users have to set HDMI™ 2.1 to PC. PIP Mode Standard Resolution HDMI™/ DP/ USB-C Full HD 1920x1080 @60Hz 2560x1440...
Page 22
PBP Mode 1 Standard Resolution HDMI™/ DP USB-C Used for PBP Full 960x2160 @60Hz Screen 1920x1440 @60Hz 2880x2160 @60Hz PBP Mode 2 Standard Resolution HDMI™/ DP USB-C Video Timing Resolution 480P 720P 1080P @60Hz 2160P @30Hz @50Hz @60Hz Used for PBP Full 1920x2160 @60Hz Screen...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 25
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/ Environment ∙ To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 28
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.