Checking the power reserve
1
2
3
Checking the power reserve and power generation amount
Change the mode to [ TME ] or [ UTC ] and push the
crown in to position 0 .
Press and release the upper right button Ⓑ .
The function hand indicates the power reserve in levels (page
26) and the second hand indicates the current time zone
setting of the home time.
• The power reserve level is always shown in the [ LLI ] mode.
Press and release the upper right button Ⓑ to finish
the procedure.
The second hand returns to indicate the seconds.
• The hand returns automatically in 10 seconds without
pressing the button.
25