Table of Contents
Advertisement
Loewe bild 5 oled / bild 4 oled
User handbook
External devices
Connecting active loudspeakers
If you want to use active speakers, you can connect them with an
adapter cable to the TV set.
Plug a network cable (Category 5e or higher) to the AUDIO LINK
port of the TV set. Connect the Ethernet cable to the RJ45 socket
of the Digital Audiolink / Audiolink converter available as ac-
cessory. To the other end of the convertor you connect the adaptor
cable Audiolink / 30cm / 9pin + 5.1 Out + Center In. Connect
the cinch connectors of the adaptor cable to the cinch connectors of
the speakers / subwoofer.
The cinch connections of the adaptor cable are labelled:
R for Front right
L
for Front left
C for Centre
The connections for the adaptor cable are pre-amplifier
outputs. Therefore, only active loudspeakers / active
subwoofers may be connected directly to the adaptor cable.
Front
left
Surround
left
Adapter cable
Converter
Digital Audiolink / Audiolink
Ethernet cable
(Cat. 5e or higher)
Connection of active speakers to the TV set
Sound reproduction via the speaker system
The settings for sound reproduction via active speakers you find in the
sound components wizard (see chapter System settings, section
Connections – Sound components).
122
SR for Surround right
SL
for Surround left
SUB for Subwoofer
Center
Subwoofer
Surround
CENTER
IN
DIGITAL
AUDIO
LINK
Connecting the HiFi/AV amplifier
Connecting digital HiFi/AV amplifiers
Connect the digital audio output of the TV set SPDIF OUT to the digital
audio input of the amplifier via a cinch cable:
Digital amplifier
DIGITAL IN
Connect digital audio (pre) amplifier via audio return channel
(HDMI ARC)
Front
right
Connect the HDMI1 socket of the TV using an HDMI cable with the
HDMI socket of the ARC-compatible audio (pre) amplifier (e.g.Loewe
MediaVision 3D). It is not necessary to log-in the amplifier separately
with the TV set.
Connecting analogue HiFi/AV amplifiers
Use a stereo cinch/jack adaptor cable to connect the analogue audio
right
output AUDIO OUT to the analogue audio input of the amplifier:
Analogue amplifier
AUDIO IN
L
R
TV set
Reproducing sound via an HiFi/AV amplifier
The sound reproduction via connected HiFi/AV amplifiers can be
adjusted in the sound components wizard (see chapter System set-
tings, section Connections – Sound components).
TV set
SPDIF
OUT
TV set
AUDIO
OUT
Advertisement
Table of Contents
