LG WM2010CW Service Manual page 10

■ HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
· Make sure that the hose is not twisted.
※ The end of the drain hose should be placed less than 96" from the floor.
■ CONNECT POWER PLUG
· Connect the power plug to the wall outlet.
www.Appliantology.org
· Avoid submerging the end of the hose.
· Avoid connecting several electric devices, as
doing so may cause a fire.
9