MSI Optix PAG272QRZ Manual page 26

1st Level Menu
Anti Motion Blur
(optional)
Zero Latency
Refresh Rate
2-6
Alarm Clock
Screen
Assistance
2nd/3rd Level Menu
(OFF)
(ON)
(OFF)
(ON)
Location Left Top
Right Top
Left Bottom
Right Bottom
Customize
OFF
ON
Location Left Top
Right Top
Left Bottom
Right Bottom
Customize
OFF
15:00 00:01~99:59
30:00
45:00
60:00
None
Icon
Position
Reset
Description
■ Brightness cannot be adjusted when Anti
Motion Blur is set to ON�
■ When Response Time is set to Fastest with
at least 85Hz Screen Refresh Rate, Anti
Motion Blur will be automatically enabled�
■ When Screen Refresh Rate is lower than
85HZ, Anti Motion Blur cannot be enabled
and Response Time cannot be set to
Fastest�
■ When Anti Motion Blur is enabled, HDCR
cannot be enabled and will be grayed out�
■ This function is recommended for cinema,
FPS and Racing games�
■ When FreeSync is enabled, Anti Motion Blur
will be grayed out�
■ Users can adjust this item in any mode , any
input source , any resolution and any screen
refresh rate�
■ While FreeSync is enabled, Zero Latency
have to set to ON�
■ Users can adjust Refresh Rate in any Mode�
■ Default Refresh Rate Location is Left Top�
Location is adjustable in OSD Menu� Press
the Middle Button to confirm and apply your
Refresh Rate Location�
■ This monitor follows and works at the
Operating System's preset Screen Refresh
Rate�
■ Users can adjust Alarm Clock in any Mode�
■ After setting the time, press the Middle
Button to activate the timer�
■ Default Alarm Clock Location is Left Top�
Users can select their own location�
■ Users can adjust Screen Assistance in any
Mode�
■ Screen Assistance default is None�