Notification Indication On The Watch; Canceling The Notification Indication; Pairing (Registering) The Smartphone; Choosing The Destination To Save Registration Information - Citizen Eco-Drive W770 Instruction Manual

Notification indication on the watch

The second hand points the notification indication corresponding to the type of
received notification.
Notification indication by the second hand
Indication Second hand
Notification type
position
Incoming call
CALL 55 seconds
notification
Various info
INFO 50 seconds
notification
Disconnection
LL 45 seconds notification (Link
Loss)
Receiving time
info or connecting/
executing an iiidea
ACT
40 seconds
through operation
of the watch
(Activation)
Indication of an
CHECK
35 seconds
error of an iiidea
• No "CHECK" is printed on the dial on some models.
• The notification indication by the second hand is shown only when the mode of
the watch is [TME] or [L-TM] and the position of the crown is
receives notification in the other statuses than above, notification indication is
postponed until its status changes to any one above.
• When the watch receives a new notification while it indicates a notification, the old
one is canceled and the new one is indicated.
Notification sound and vibration
Notification sound and vibration can be added to the indication of the second hand
by using an iiidea for setting notification.
• Notification by sound or vibration comes out even when the second hand cannot
indicate notification.
Notification reception area
• Connectable distance between the watch and the smartphone is up to about 10 m (33
feet). Connectable range may be shorter due to obstacles such as walls.
Do not block the watch with your body such as your arm.

Canceling the notification indication

The second hand showing notification indication does not return to normal
movement until the indication is canceled.
• The manually canceled notification cannot be shown again.
1
Press and hold the lower right button
second while notification is indicated.
The notification indication is canceled and the second hand returns to normal
movement.
• Changing the position of the crown also cancels the notification indication.
Testing the vibration of notification
The vibration of notification can be checked.
• You cannot test it while the power reserve level is in "0".
• The vibration settings must be executed on an iiidea.
1
Change the mode to [ALM] (page 2) and push the crown in to position
2
Press and release the upper right button
The watch starts vibrating.
• Notification vibration is repeated five times.
3
Change the mode to [TME] and push the crown in to position
procedure.
The second hand and function hand return to normal indication.
S
24 60
18 6
30
12
M
M
. When the watch
0
or the upper right button for 1
A B
0
.
B
to finish the
0

Pairing (registering) the smartphone

Execute registration at first when connecting the watch and your smartphone.
Before registration
• Unique registration information is saved on the watch and smartphone as
registration is executed.
• Up to three registrations can be saved on the watch with choosing saving
destination. Saved registration information can be checked on the app.
• When you have two or more registered smartphones, you can switch saved
registration information to connect/disconnect with one of them. (page 5)
• New registration information cannot be saved on the saving destination containing
one without deleting the existing one (page 9).

Choosing the destination to save registration information

1
Change the mode of the watch to [TME] (page 2) and pull the crown out to
position .
2
The second hand points the saving destination of registration information
currently chosen and the function hand indicates connection status (ON/OFF).
2
Rotate the crown to choose the destination to save registration information.
S
24 60
18 6
12 30
M
3
Push the crown in to position
The second hand and function hand return to normal indication.
M
Registering the smartphone
• For registration, you have to operate both the watch and the smartphone.
• Be sure that the watch and the smartphone are charged enough. Especially, check
the power reserve of the watch (see page 2) and charge it before registration if
the power reserve level is "1" or "0".
• It may take 20 - 30 seconds to finish registration. Even when registration failed, the
watch returns to normal movement in about 30 seconds.
Operation on the smartphone
1
Download the dedicated app "CITIZEN Eco-Drive W770" at an app site and
install it.
2
Start the dedicated app.
• Keep the screen of the app shown.
3
Tap [Pair a watch].
• When the message is not indicated, tap
a watch].
4
Tap [Pair a watch].
Operation of the watch
5
Change the mode to [TME] or [L-TM] (page 2) and push the crown in to
position .
0
6
Press and release the upper right button
The second hand points "ACT" (40-second position) and registration starts.
.
• Agree when a dialog appears on the screen of the app to request your permission to
use Bluetooth connection.
• On some models of smartphones, you must allow using of your location
information.
CITIZEN CONNECTED Eco-Drive W770 Riiiver Instruction manual
Saving destination of registration information 1
Saving destination of registration information 2
Saving destination of registration information 3
to finish the procedure.
0
on the bottom of the screen and tap [Pair
. S
B
24 60
18 6
12 30
M
M
4/16