Download Print this page

Advertisement

Quick Links

BEFORE BEGINNING YOUR INSTALLATION
Read through the entire instruction guide before getting started with the installation. Professional installation is
recommended for this product.
CONTENTS
DC-DC Multi-stage Battery Charger (Red)
Color-code Wires x 7
Anderson Plugs x 6
This battery charger is not intended to supply power to a low voltage electrical system other than
to charge a battery.
SAFETY INSTRUCTIONS
 Make sure your battery ground is detached before getting your installation started.
 Children or adults who lack experience or professional knowledge should not use this unit.
 Do not use or store this charger near heat sources such as fire or heaters or expose it to flammable chemicals,
vapors or corrosive gases.
 Only use this product as intended.
 Do not strike or throw the charger.
 Do not mount the product in places where there is a risk of gas explosion.
 Inadequate ventilation may lead to overheating and inefficient charging.
 Please note that this DC-DC charger is not waterproof.
 This product should be firmly fastened to prevent fall down or tip over.
 Please do not disassemble this charger as such action will not only cause potential damage to you and your unit,
but will also void the warranty.
 Please disconnect the charger before maintenance or cleaning your vehicle.
 Before charging, please wear proper eye protections.
 If battery acid contacts your skin or clothing, remove the affected clothing and wash the affected area of your skin
immediately with soap and water. If battery acid enters your eye, immediately flood eye with running cold water
for at least 10 minutes and seek medical assistance immediately.
 Do not smoke or have an open spark or fire near this unit.
 Avoid dropping any metal tool or object on the battery. Doing so could create a spark or short circuit which goes
through the battery or another electrical tool that may create an explosion.
 Examine the battery charger regularly for damage. If any damage is found on the unit, discontinue use
immediately.
PAGE 1 of 4
VGE4001R
USER MANUAL

Advertisement

loading

Summary of Contents for Vixen VGE4001R

  • Page 1 VGE4001R USER MANUAL BEFORE BEGINNING YOUR INSTALLATION Read through the entire instruction guide before getting started with the installation. Professional installation is recommended for this product. CONTENTS  DC-DC Multi-stage Battery Charger (Red)  Color-code Wires x 7  Anderson Plugs x 6 This battery charger is not intended to supply power to a low voltage electrical system other than to charge a battery.
  • Page 2 VGE4001R USER MANUAL INSTALLATION  This charger can be installed horizontally or vertically.  Please make sure that the charger is installed as close as possible to the battery you are going to charge, and that the area is not susceptible to moisture, water, dust or high temperatures.
  • Page 3 VGE4001R USER MANUAL CHARGING DC BATTERY  Start your vehicle and let it idle.  The charger will recognize that there is a charge being applied to the main starting battery.  The charger will charge the auxiliary battery when the main starting battery has reached 13V. The main battery will start charging the auxiliary battery when its voltage is at or above 12.8V (ACC line connected).
  • Page 4 VGE4001R USER MANUAL SPECIFICATIONS DEEP CYCLE BATTERY MAINTENANCE  This DC-DC charger will be used to charge your auxiliary battery. For example, deep cycle batteries that are designed to provide power for your fridges and lights in a caravan or camper.