Troubleshooting - Siemens KI96N Series Information For Use

Table of Contents

Advertisement

14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.
Fault
The appliance is not
cooling, the displays
and lighting are lit.
The LED lighting does
not work.
A warning tone
sounds and the set
temperature (refriger-
ator compartment)
and
flash.
A warning tone
sounds and the set
temperature (freezer
compartment) and
flash.
Cause and troubleshooting
Showroom mode is switched on.
Switch off the appliance. → Page 15
1.
Wait 2 minutes.
2.
Switch the appliance back on. → Page 14
3.
Wait 1 minute and then press and hold
4.
until 4 audible signals have sounded.
After a short time, check whether your appliance is
5.
cooling.
Different causes are possible.
Call customer service.
The customer service number can be found in the
enclosed customer service directory.
The refrigerator compartment door is open.
Close the refrigerator compartment door.
Different causes are possible.
Press
a The alarm is switched off.
The freezer compartment door is open.
Close the freezer compartment door.
External ventilation openings are covered up.
Remove any obstructions from in front of the ex-
ternal ventilation openings.
Larger quantities of fresh food have been put in.
.
Troubleshooting en
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ki96nnse0

Table of Contents