Data Copy From Usb Memory To Tv Set - Panasonic TX-L32E6E Service Manual

Data Copy from USB Memory to TV set

1. Turn on the TV set.
2. Insert USB Memory with Data to USB Terminal.
On-screen Display will be appeared according to the Data folder automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2771
(b) For Hotel: 4851
Data will be copied from USB Memory to TV set.
4. After the completion of copying to USB Memory, remove USB Memory from TV set.
(a) For Board replacement: Data will be deleted after copying (Limited one copy).
(b) For Hotel: Data will not be deleted and can be used for other TVs.
5. Turn off the TV set.
Note:
1. Depending on the failure of boards, function of Data for board replacement does not work.
2. This function can be effective among the same model numbers.
Data Copy(Board replacement )
Input Password
Performing
Input password -----
Data Copy(Board replacement )
Copy Media to TV
Please wait for a while
Please do not remove the Media
WRITING
Performing
Data Copy(Board replacement )
Data copy has been successful
Please turn off the TV for system
FINISH
initializing
19
Input Password
2771 or 4851
Performing
Completion