Philips Sonicare 3100 Series Manual page 14

14
English
QuadPacer
1
2
4
3
SmarTimer
Activating or deactivating features
EasyStart
To deactivate the pressure sensor see 'Activating or
deactivating features'.
The QuadPacer is an interval timer that has a short beep
and pause to remind you to brush the 4 sections of your
mouth evenly and thoroughly. This Philips Sonicare
toothbrush comes with the QuadPacer feature activated.
The SmarTimer indicates that your brushing cycle is
complete by automatically turning off the toothbrush at
the end of the brushing cycle.
Dental professionals recommend brushing no less than 2
minutes twice a day.
Note: If you press the power on/off button after you
started the brushing cycle, the toothbrush will pause.
After a pause of 30 seconds, the SmarTimer resets.
You can activate or deactivate the following features of
your toothbrush:
- EasyStart
- Brush head replacement reminder
- Pressure sensor
To activate or deactivate these features, follow the
instructions below:
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button while the
handle remains on the charger.
3 Keep the power on/off button pressed until you hear
a single short beep (after 3 seconds).
4 Release the power on/off button.