Citizen AT8260-18A Instruction Manual page 59

Troubleshooting
◆
All Reset
When the watch does not work properly, you can reset all the settings. If the
power reserve is insufficient, charge the watch first.
Check before performing All Reset.
After performing All Reset, you need to configure all the settings again. Set the
watch again by following the procedures below.
1. Correct the reference position. See page 51.
2. Set the city. See page 22.
• To set Summer Time, see page 27.
3. Set the time.
To adjust the time by receiving the time signal, see page 43. To adjust the time
manually, see page 45.
58