Adjustment And Repair Procedures - Sanyo CE25B5-C Service Manual

OPTION SETTING
[After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the option data of TV set and service adjustments data for each circuit, therefore,
when the memory IC is replaced, it should be performed following setting and "SERVICE ADJUSTMENT" on next
page.
To enter to the Option Mode
+ Press and hold the F/OK button on the remote control and P
window will appear on the screen. Set the options as shown below.
To set the option mode
+ Highlight the desired option item by using the P
+ To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button.
+ The data which is set in the option mode is stored into the memory IC automatically.
Following table shows the available option items and default setting mode.
Option Mode
ON-TIMER
SORT MODE
PLUG & PLAY
WELCOME TEXT
CODE TEST
WSS
WIDE
OPTION
312/313 Mode
AV3 OPTION
3D SURROUND
Exit from the Service Mode
+ Press the RECALL button.
OPTION
ON-TIMER
SORT MODE
PLUG & PLAY
WELCOME TEXT
CODE TEST
WSS
WIDE
OPTION
312/313 Mode
AV3 OPTION
3D SURROUND
ADJUST :
Mode
ON or OFF
AUTO TUNE/SORT
or AUTO TUNE
or ATS EURO PLUS
ON or OFF
ON or OFF
OFF or ON
ON or OFF
ON or OFF
UK or IRELAND
ON or OFF
ON or OFF
ON or OFF
button on the front panel of the TV. The option
ON
AUTO TUNE/SORT
ON
ON
OFF
ON
OFF
UK
OFF
ON
ON
EXIT : RECALL
or P button .
Description & Note
On-timer available, default "ON"
Tuning mode, default "AUTO TUNE/SORT"
Plug & Play mode, default "ON"
Display message when first set up, default "ON"
For factory use, default "OFF"
Wide Screen Signaling available, default "ON"
Wide mode, default "ON"
Destination option , default "UK"
Teletext mode, default OFF
Front AV disable, default ON
3D Surround available, default ON
-7-
C3VES