Operating Engine; Sending Fuel; Starting Engine - Yamaha F150 Owner's Manual

Operation
 To prevent electrostatic sparks, discharge
any built-up static electricity from your
body before refueling.
(1) Remove the fuel tank cap.
(2) Fill the fuel tank with fuel. WARNING! Do
not overfill. Otherwise fuel can expand
and overflow if the temperature in-
creases.
[EWM02611]
(3) Tighten the fuel tank cap securely.
(4) Wipe up any spilled gasoline immediate-
ly with dry rags. Dispose of rags properly
according to local laws or regulations.
EMU40252

Operating engine

EWM02601
This product emits exhaust gases which
contain carbon monoxide, a colorless,
odorless gas which could cause brain
damage or death when inhaled. Symp-
toms include nausea, dizziness, and
drowsiness. Keep cockpit and cabin areas
well ventilated. Avoid blocking exhaust
outlets.
EMU31814

Sending fuel

(1) If there is a fuel joint or a fuel valve on the
boat, firmly connect the fuel line to the
joint or open the fuel valve.
(2) Squeeze the primer pump, with the ar-
row pointing up, until you feel it become
firm.
52
1. Arrow
EMU27496

Starting engine

EWM01601
Before starting the engine, make sure that
the boat is tightly moored and that you can
steer clear of any obstructions. Be sure
there are no swimmers in the water near
you.
EMU41792
Start-up checks
Place the control lever in neutral and turn the
main switch to " " (on) or turn the "POWER"
switch on. If the buzzer sounds and the water
separator-alert indicator blinks, consult a
Yamaha dealer immediately.
EMU48603
Procedure for single station models (EKS)
EWM01842
 Failure to attach the engine shut-off
cord could result in a runaway boat if
operator is ejected. Attach the engine
shut-off cord to a secure place on your
clothing, or your arm or leg while oper-
ating. Do not attach the cord to clothing
that could tear loose. Do not route the
cord where it could become entangled,
preventing it from functioning.
1 1