Canon G4200 Online Manual page 207

When the paper settings for printing or copying are different from the paper
information registered to the printer:
Ex:
• Paper setting for printing or copying: A5
• Paper information registered to the printer: A4
When you start printing or copying, a message is displayed.
Pressing the OK button displays the paper setting specified for printing or copying under the message.
Note
• Depending on the setting, the choices below may not be displayed.
Use rear tray set.
Select if you want to print on the paper loaded without changing the paper settings.
For example, when the paper setting for printing or copying is A5 and the paper information
registered to the printer is A4, the printer starts printing or copying with A5 on the paper loaded.
Replace the paper
Select if you want to print after replacing the paper of the rear tray.
For example, when the paper setting for printing or copying is A5 and the paper information
registered to the printer is A4, you load A5 sized paper before you start printing or copying.
The paper information registration screen is displayed after replacing the paper and closing the feed
slot cover. Register the paper information according to the paper that you loaded.
Note
• For more on the proper combination of paper settings you can specify by the printer driver or on the
LCD:
• For Windows:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
207