Smartstart (Depending On Model) - Miele G7966SCVI Operating Instructions Manual

Running RemoteUpdate
Information about the content and
scope of a RemoteUpdate will be pro-
vided in the Miele app.
A message will appear in your dish-
washer display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
appliance is turned on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not turn the dishwasher off during
the update. Otherwise, the update
will be aborted and will not be in-
stalled.
- Some software updates can only be
carried out by Miele Customer Ser-
vice.
SmartStart (depending on
model)
This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
"Miele@home" under "Settings").
The SmartStart function is used for start-
ing your dishwasher automatically at a
time when your energy costs are most
economical.
To use this function you may need fur-
ther technical accessories.
If you have activated
, the Timer  menu of the selected
ted
program will no longer show
but will instead show
dishwasher will then start within the
timeframe specified when it receives a
signal from the energy supplier.
If it has not received a signal from the
energy supplier by the latest possible
start time, the dishwasher will start au-
tomatically.
Settings
SmartStart Permit-
EcoStart
. The
SmartStart
41