Table of Contents
Advertisement
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LB01T
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature
: 25 ºC ± 5 ºC (77 ºF ± 9 ºF), CST : 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Model General Specification
No.
Item
1.
Market
2.
Broadcasting system
3.
Receiving system
4.
Video Input RCA
5.
Component Input
6.
RGB Input (1EA)
7.
HDMI Input
8.
Audio Input
9.
SDPIF out
10.
USB
Copyright © 2011 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
Specification
Australia, NewZealand, Singapore, Malaysia,
Vietnam, Indonesia, South Africa, Israel, A-ASIA
1) PAL/SECAM-B/G/D/K
2) PAL-I/II
3) NTSC-M
4) DVB-T
Analog : Upper Heterodyne
Digital : COFDM(DVB-T)
PAL, SECAM, NTSC
Y/Cb/Cr, Y/Pb/Pr
RGB-PC
HDMI1-DTV/DVI
HDMI2-DTV/DVI
HDMI3-DTV/DVI
RGB/DVI Audio
Component
AV
SPDIF out
For My Media(Movie/Photo/Music List) or For SVC
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC:CE, IEC
only Analog for A-ASIA
PAL for NZ/SG
DVB-T
G
- Guard Interval(Bitrate_Mbit/s)
1/4, 1/8, 1/16, 1/32
- Modulation : Code Rate
QPSK
16-QAM : 1/2, 2/3, 3/4, 5/6, 7/8
64-QAM : 1/2, 2/3, 3/4, 5/6, 7/8
4 System : PAL, SECAM, NTSC, PAL60
Analog(D-SUB 15PIN)
PC
- HD Model : HDMI version 1.3
- FHD Model : HDMI version 1.4
Support HDCP
- 6 -
Remarks
: 1/2, 2/3, 3/4, 5/6, 7/8
LGE Internal Use Only
Advertisement
Table of Contents
