Advertisement
6. Set the washbasin cabinet onto the wall bracket. Adjust
leveler. Be sure the cabinet adjusted level and the back
board of cabinet appressed to the wall by adjusting the
screws of wall clips. As Fig 4.
7. Mark the wall through two holes at the corresponding
positions. As Fig 5.
8. Dismount the washbasin cabinet and put aside. Drill holes
at the marked position.
Caution!
Avoid the cables and pipes inner set when
drilling in the wall.
Note:
Different types of bolts are required for different
decoration boards. Please apply suitable bolts and plugs.
9. Insert the plugs into the wall.
10. Set the washbasin cabinet onto the brackets. Be sure the
cabinet adjusted level and the back board of cabinet
appressed to the wall by adjusting the screws of wall clips.
As Fig 4.
11. Apply a washer to the screw before tighten it. Make sure
the washbasin cabinet has been fixed firmly on the wall.
1262871-T01-B
6.
4
8
Fig.5
5
7.
8.
9.
10.
11.
-5-
5
8
4
Advertisement
