Trouble Shooting - The Singing Machine Bratz SMB-658 Instruction Manual

13.5" color television
Table of Contents

Advertisement

TROUBLE SHOOTING

Your television is designed to give you trouble-free performance for many years. If you have
a problem with your TV, try the solutions listed below.
If the suggestions listed below do not solve your problem, contact your local customer support hotline.
There is no picture or sound, or the TV doesn't turn on.
Make sure the TV is plugged in.
Make sure the MUTE is not set.
Make sure the POWER is on.
Make sure a headphone is not inserted.
If there is neither picture nor sound, unplug the TV for 30 seconds, then plug it in and try again.
There is no picture or sound on some UHF channels.
Try another station. If the other stations are OK, it may be a station problem.
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
See if anything is interfering with the antenna signal.
Make sure the AIR/CABLE setting is correct.
The sound is OK, but the picture is poor.
Try another station. If the other stations are OK, it may be a station problem.
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
There is poor reception on some channels.
Try another station. If the other stations are OK, it may be a station problem.
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
Cannot tune to a cable channel.
Make sure the AIR/CABLE setting is correct.
The channel may not be programmed into memory.
The picture rolls, slants, shows lines, is grainy, has poor color, or has ghosts.
Try another station. If the other stations are OK, it may be a station problem.
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
See if anything is interfering with the antenna signal.
The remote control does not work.
Make sure the TV is plugged in.
Make sure there are fresh batteries in the remote control.
Make sure there is nothing blocking the remote control signal.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents