Cd Player Operation - The Singing Machine Bratz SMB-634 Instruction Manual

CD PLAYER OPERATION

1. Set the FUNCTION/BAND selector to CD position.
2. To open the CD compartment, lift the CD door on the edge (marked LIFT TO OPEN).
3. Place a compact disc on the spindle with label side facing upward.
4. To close the CD compartment, push the door down.
- The CD player scans the contents of the CD and the total number of tracks is displayed
for about 3 sec.
5. Press the PLAY/PAUSE button to start playback from track 1 and the display will indicate
the playback track number.
6. Adjust the sound using the VOLUME control.
7. To interrupt playback, press PLAY/PAUSE button.
Press the PLAY/PAUSE button again to continue playback.
8. Press STOP button to stop playback.
9. To switch off the CD, press the POWER button once.
Note: CD playback will also stop when:
- The CD has reached the end.
- The CD door is open.
- The FUNCTION/BAND selector is set to AM / FM / FM ST. position.
SKIP/SEARCH
Selecting a different track during playback
- You can jump to the next track by pressing
press more than once until the display shows the desired track number.
- If you want to repeat the tuning track from the beginning, press
repeat one of the previous tracks, press
required track number.
Starting with a particular track
1. In the STOP position you can select a desired track using the
2. Press PLAY/PAUSE to start playback.
Searching for a passage within a track
You can search for a passage within a track. The CD is played at low volume and at high
speed, however, the sound is still recognizable.
1 Keep the or
recognize the required passage:
- Normal CD playback will resume from this point.
or
button pressed during playback, and release the button as soon as you
once. If you want to skip more than one track,
more than once until the display shows the
7
once. If you want to
or button.