The Singing Machine Bratz SMB-567 Instruction Manual page 13

CD OR CD+G OPERATION
PLAY/PAUSE MODE
To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE
!
LED will be lit.
To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED
!
Indicator will flash.
To resume play, press this button again.
!
NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the monitor. Any
distortion will remain until the whole screen is refreshed during an instrumental break or you
stop the song and start it from the beginning.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
number of tracks will be shown on the LED window).
SKIP PLAY (FOR BOTH CD AND CDG DISCS)
During STOP mode, you can skip up or down to your desired track number by pressing a
!
SKIP button ( - SKIP -
To resume playing the selected song, press PLAY/PAUSE button.
!
SEARCH (FOR AUDIO CD DISC ONLY)
When playing any audio CD, press and hold the SKIP button (
search at high speed in the forward or backward direction. Normal play will continue when you
release the button.
REPEAT
To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will
!
start to flash.
To repeat all tracks, press the REPEAT button twice. The REPEAT LED will light up and stay
!
lit.
To clear the repeat function. Press the REPEAT button again. The REPEAT LED will turn off.
!
PROGRAM
Use this button to program and play back songs in a preselected order.
!
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [
Step 2: Press the double arrow keys (
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a
maximum of 20
Step 4: Press PLAY to activate PROGRAM.
Press the STOP button to clear all the programmed entries.
!
MONITOR (FOR CDG ONLY)
To display CDG lyrics on the Singing Machine's monitor, set the FUNCTION Selector to
!
MONITOR ON.
To turn off the monitor on the Singing Machine, set the FUNCTION Selector to MONITOR
!
OFF mode.
Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD controls at the back of the
!
Singing Machine to have the best picture quality.
).
-SKIP-
tracks.
E12
-SKIP- ). The CD will
].
) to select a desired track.