LG T1021PFRV Owner's Manual page 27

lacing, Leveling and Installation
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is
Note :
installed on a carpeted floor.
2. Install the washing machine on a level and firm
surface, any tilt should be less than 4°.
How to adjust leveling
Adjustable leg
Turn the adjustable legs to set the washer
horizontal (Both the front legs).
 Don't add anything under back side legs.
Distance between drain hose and the wall
Distance between drain hose and the wall should be more
than 10cm, and the distance between the other part or the
rear part and the wall should be more than 2 cm. .
More than 2cm
Anti-rat cover installation
Insert the anti rat cover firmly from back side or
Front side of washing machine and screw it.
High Base
Middle Base
More than 2cm
More than 10cm
SETTING SCREW (3)
Anti-Rat Cover
FIXING POSITION
Screws (8)
Anti Rat Cover
Adjustable Leg
1
Installation area
Install the washer on flat and firm surface.
2
Checking level
The Basement is not flat, fill the water just touching the
Pulsator and see uniform distribution. If not, adjust the
legs as shown in the figure.
Top View
3
Checking Proper placement
Press the corners of the machine diagonally
as shown in the figure, If any movement is observed,
adjust the legs for proper leveling.
27