Table of Contents
Advertisement
NETWORKSETUP
7
Press »EXIT« to end the setting.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
- ------------------------------------------------------------------------------------------
Manualconnection
Certain networks require Static IP address.
If your network requires a Static IP address,
you must enter the »IP Address«, »Netmask«,
»Gateway« and »DNS« values manually. You
can get »IP Adresi«, »Netmask«, »Gateway«
and »DNS« values (ISS) from your Internet
Service Provider.
1
Open the menu with »MENU«.
2
Press »
press »
3
Press »
Network« and press »OK« to confirm.
4
To approve the Privacy Policy, press »
>
»
confirm.
5
According to your network infrastructure,
press »
»IPv6« and press »OK« to confirm.
Note:
To access the internet through IPv6, your
7
internet service provider and modem must
support IPv6. If only the modem supports
IPv6, it can only connect to the modem; you
cannot connect to internet.
6
Press »
and press »OK« to confirm.
– » IP Address«, »Subnetwork«, »Gateway«
7
From the »IP Address« line, use »1...0« to
enter the IP address.
8
From the »Subnetwork« line, use »1...0« to
enter the Subnetwork address.
9
From the »Gateway« line, use »1...0« to
enter the Gateway address.
10
From the »DNS1« line, use »1...0« to enter
the DNS1 address.
11
From the »DNS2« line, use »1...0« to enter
the DNS2 address.
12
To complete the setting process, press »OK«
to confirm.
13
Press »EXIT« to end the setting.
« or »
« to select »Network« and
V
Λ
>
« to confirm.
« or »
« to select »Wired
V
Λ
« to select »Accept« and press »OK« to
« or »
« to select »IPv4« or
V
Λ
« or »
« to select »Manual Input«
V
Λ
and »DNS« options are enabled.
<
« or
ENGLISH
61
Advertisement
Table of Contents
