English BRUSHLESS CORDLESS 13 mm DRILL/DRIVER, DCD991 BRUSHLESS CORDLESS 13 mm DRILL/DRIVER/ HAMMERDRILL, DCD996 Congratulations! DCD991 DCD996 You have chosen a D WALT tool. Years of experience, thorough Screwdriving product development and innovation make D WALT one of the Vibration emission value a <2.5 <2.5 most reliable partners for professional power tool users.
English SAVE ALL WARNINGS AND INSTRUCTIONS switch or energising power tools that have the switch on invites accidents. FOR FUTURE REFERENCE d ) Remove any adjusting key or wrench before turning The term “power tool” in the warnings refers to your mains- the power tool on.
English b ) Use power tools only with specifically designated • Health hazards caused by breathing dust developed when battery packs. Use of any other battery packs may create working in wood. a risk of injury and fire. • Risk of personal injury due to flying particles. c ) When battery pack is not in use, keep it away from •...
English CAUTION: Children should be supervised to ensure that Charging a Battery (Fig. B) they do not play with the appliance. 1. Plug the charger into an appropriate outlet before inserting NOTICE: Under certain conditions, with the charger battery pack. plugged into the power supply, the exposed charging 2.
English Electronic Protection system If battery contents come into contact with the skin, • immediately wash area with mild soap and water. If XR Li-Ion tools are designed with an Electronic Protection battery liquid gets into the eye, rinse water over the open eye System that will protect the battery pack against overloading, for 15 minutes or until irritation ceases.
English batteries (combo kits) can be air shipped as excepted if the Watt Hour rating of the battery pack is no greater than 100 Whr. Regardless of whether a shipment is considered excepted Read instruction manual before use. or fully regulated, it is the shipper's responsibility to consult the latest regulations for packaging, labeling/marking and documentation requirements.
English 1 Kitbox tool is compatible with Bluetooth® Battery Technology and with the D WALT Tool Connect™ App. Please see your Tool Connect™ 1 Charger App instruction manual for more information. 1 Side handle DO nOT use under wet conditions or in the presence of 1 Instruction manual flammable liquids or gases.
Page 13
English Variable Speed Switch (Fig. A) nOTE: Do not change gears when the tool is running. Always allow the drill to come to a complete stop before changing To turn the tool on, squeeze the trigger switch . To turn the 1 ...
English CAUTION: When using the tool as a spotlight, be sure WARNING: To reduce the risk of serious personal it is secured on a stable surface where it will not cause a injury, ALWAYS hold securely in anticipation of a tripping or falling hazard.
Page 15
English Hammerdrill Operation (Fig. E) Consult your dealer for further information on the appropriate accessories. 1. Select the desired speed/torque range using the gear shifter Protecting the Environment to match the speed and torque to the planned operation. Set the torque adjustment collar 5 ...
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)
Page 17
DCF887 Final page size: A5 (148mm x 210mm)
Page 18
English (original instructions) Copyright D WALT...
Page 21
English BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF887 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Brushless Cordless Compact Impact Driver DCF887...
Weight English Batteries Chargers/Charge Times (Minutes) Weight DCB107 DCB113 DCB115 DCB118 DCB132 DCB119 Cat # DCB546 18/54 6.0/2.0 1.05 DCB547 18/54 9.0/3.0 1.25 DCB181 0.35 DCB182 0.61 DCB183/B 0.40 DCB184/B 0.62 DCB185 0.35 DCB187 0.48 f ) If operating a power tool in a damp location is instructions may result in electric shock, fire and/or serious injury.
English Additional Specific Safety Rules for Impact b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled Wrenches/Drivers with the switch is dangerous and must be repaired. •...
Page 24
English Important Safety Instructions for All reassembly may result in a risk of electric shock, electrocution or fire. Battery Chargers • In case of damaged power supply cord the supply cord must SAVE THESE INSTRUCTIONS: This manual contains important be replaced immediately by the manufacturer, its service agent safety and operating instructions for compatible battery or similar qualified person to prevent any hazard.
Page 25
English pack charging mode. This feature ensures maximum battery charger as battery pack may rupture causing serious pack life. personal injury. A cold battery pack will charge at a slower rate than a warm • Charge the battery packs only in D WALT chargers.
Page 26
English The International Carriage of Dangerous Goods by Road (ADR). 2. For long storage, it is recommended to store a fully charged Lithium-ion cells and batteries have been tested to section 38.3 battery pack in a cool, dry place out of the charger for of the UN Recommendations on the Transport of Dangerous optimal results.
Page 27
English Package Contents tool particularly useful for driving fasteners in wood, metal and concrete. The package contains: DO nOT use under wet conditions or in the presence of 1 Impact driver flammable liquids or gases. 1 Charger This impact driver is a professional power tool. 1 Li-Ion battery pack (M1, L1, C1, P1, D1, D1B models) DO nOT let children come into contact with the tool.
Page 28
English Belt Hook and Magnetic Bit Holder (Fig. A) Forward/Reverse Control Button (Fig. A) WARNING: To reduce the risk of serious personal A forward/reverse control button determines the direction of 2 injury, turn tool off and disconnect battery pack the tool and also serves as a lock-off button. before making any adjustments or removing/ To select forward rotation, release the trigger switch 1 ...
Page 29
English To install an accessory, fully insert the accessory. The accessory is locked into place (Fig. E). To remove an accessory, pull the chuck collar 3 away from the Cleaning front of the tool. Remove the accessory (Fig. F). WARNING: Blow dirt and dust out of the main housing Usage with dry air as often as dirt is seen collecting in and around the air vents.
Page 32
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)