Functions/Programmes Selected By Pressing The Function Keys For 3 Seconds - Beko CM 9102 BMG User Manual

up to 4 auxiliary rinsing steps to the pro-
gramme. You can select and use some aux-
iliary functions even though they are not
found on your product. You can increase
and decrease the duration of the Cottons
and Synthetics programmes within a safe
range.
When the Programme Personalisa-
tion auxiliary function is selected, the
washing performance and energy
consumption will be different than
the declared value.
6.8.2 Functions/Programmes
Selected by Pressing the
Function Keys for 3 Seconds
• Drum Cleaning
Press and hold the related auxiliary function
button for 3 seconds to select the pro-
gramme. Regularly clean (once every 1 to 2
months) the drum for ensuring the required
hygiene. Steam is applied before the pro-
gramme to soften the residues in the drum.
Turn on the programme when the machine is
completely empty. For more effective results,
place powder anti-limescale (drum cleaning
materials) suitable for washing machines in-
side the detergent compartment no. "2".
Leave the loading door half closed after the
programme ends for the inside of the ma-
chine to dry.
This is not a washing programme.
This is a maintenance programme.
Do not turn this programme on
when there is something inside the
machine. When you attempt to op-
erate, the machine automatically
senses that there is load inside, and
may quit or resume the programme
as per the model of your machine.
An effective cleaning is not achieved
if the programme is resumed.
• Anti-Crease+
This function is selected when the spin se-
lection button is pressed and held for 3
seconds and the programme follow-up light
for the relevant step turns on. When the
function is selected, the drum rotates for up
to 8 hours for preventing the laundry from
creasing at the end of the programme. You
can cancel the programme and take your
laundry out at any time during the 8-hour
duration. Press the function selection key or
the machine on/off key to cancel the func-
tion. The programme follow-up light will re-
main on until the function is cancelled or the
step is complete. If the function is not can-
celled, it will be active in the subsequent
washing cycles as well.
• Soaking
This function can be selected by pressing
and holding the related auxiliary function but-
ton for 3 seconds.
The Soaking in Water auxiliary function en-
sures that the stains that have penetrated
into the laundry are cleaned better by soak-
ing the laundry in detergent water before the
washing process starts.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
EN / 29