English HEAVY-DUTY CHISELLING HAMMER D25832 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Chiselling Hammer D25832 D25832...
English Electrical concrete breaker (hand-held), m ≤ 15 kg, Schedule 11, The term “power tool” in the warnings refers to your mains‑operated (corded) power tool or battery‑operated (cordless) TÜV Rheinland LGA Products GmbH, Tillystraße 2, 90431 power tool. Nürnberg, Germany, Notified Body ID No.: 0197 1) Work Area Safety (measured sound power level) dB(A)
English Hammer Safety Warnings to a rotating part of the power tool may result in personal injury. • Wear ear protectors. Exposure to noise can cause e ) Do not overreach. Keep proper footing and balance hearing loss. at all times. This enables better control of the power tool Use auxiliary handles, if supplied with the tool.
English When working above the floor, make sure that the area • Electrical Safety below is clear. Falling parts can cause injuries to bystanders. The electric motor has been designed for one voltage only. In cold weather or if the unit has not been used for a •...
English Description (Fig. A) Electronic Speed and Impact Control (Fig. A) WARNING: Never modify the power tool or any part of it. The electronic speed and impact control allows the use of Damage or personal injury could result. optimal tool control for precise chiselling. ON/OFF rocker switch Electronic speed and To set the electronic speed and impact control dial ...
English assembly at an angle of approximately 20° to the tool for Proper hand position requires one hand on the side handle 12 optimum control. with the other hand on the main handle 4 4. Lock the side handle mounting assembly in place by Mode Selection (Fig. A) securely tightening the side handle knob ...
English WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. An accidental start‑up can cause injury. Lubrication Your power tool requires no additional lubrication. Cleaning WARNING: Electrical shock and mechanical hazard.