Nikon F4 Instruction Manual page 87

1 With maxim um aperture faster than fl3.5, use TC-16A
Autofocus Converter. Incompatible with maximum aperture
of fl3.5 or slower.
2 With maximum aperture faster than f/5.6.
3 With maximum effective aperture faster than fl5.6.
4 With shutter speed set to 1/125 sec. or slower. Flash
necessary.
5 Aperture cannot be selected.
6 Exposure determined by presetting lens aperture. Exposure
must also be determined before shifting; in A mode, use
AE-L button before shifting.
7 Shutter should be released, after exposure measurement,
by stopping down PS-6.
8 Use stop-down measurement with Type S, E, K, J, or P
focusing screen.
9 Use full-aperture measurement with maximum aperture of
fll8 to fl2.8.
10
Focus lock button on TC-16 cannot be used.
11 Stop-down measurement possible. With aperture of f/5.6 or
slower, set exposure compensation dial (or focusing screen
exposure compensation dial for flash photography) to-l
With 400mm fl5.6 lens, compensate exposure to -1 when
the lens aperture is set at fl8 or slower.
12
For full-aperture measurement, set exposure compensation
dial (or focusing screen exposure compensation dial for
flash photography) to - l
13 For full-aperture measurement, set exposure compensation
dial to +l
14 1n
stop-down measurement, set exposure compensation
dial (or focusing screen exposure compensation dial for
flash photography) to - l
15
In stop-down measurement, set exposure compensation
dial to +l
16
Exposure compensation necessary. (See focusing screen's
instruction sheet.)
17 Exposure compensation necessary for fu ll-aperture
measurement. (See footnote 12 or 13.)
18
Exposure compensation necessary for stop-down measure-
ment. (See footnote 14 or 15.)
• The following Nikkor lenses cannot be used with the
F4s1F4 camera: All 8mm fl8, 16mm fl3.5 (No. 272281 -
290000), 28mm fl3.5 (No. 625611 - 999999), 35mm fl1.4
(No. 385001 - 400000), all 55mm fl1.2, all old-type Reflex
1000mm fl6.3, all 21mm fl4, all old-type PC 35mm fl3.5.
• The AF Teleconverter TC-16 (for F3AF) cannot be attached
to the F4s camera.
• To attach an old-type Reflex-Nikkor 500mm fl8 to an F4s
camera, turn the lens' tripod mounting col lar so it faces
the direction opposite the camera's grip (from the front of
the camera, it should face the right-hand side). To change
the camera/lens assembly from horizontal to vertical
position or vise versa, do not turn the assembly; turn the
tripod head.
87