Installation Checklist; Before Using The Dryer - Samsung DV7 TA2 Series User Manual

Heat pump dryer
Hide thumbs Also See for DV7 TA2 Series:
Table of Contents

Advertisement

Installation checklist

• The dryer is plugged into a properly grounded outlet.
• All packaging material is completely removed and properly disposed.
• The dryer is level and standing firmly on the floor.
• Start the dryer to make sure that it runs, heats, and shuts off.
• Run a TIME DRY cycle for 20 minutes to see if the HC information code is
displayed. If this is the case, contact a local service centre.
• After installation, we recommend that you wait at least 1 hour before using the
dryer.

Before using the dryer

• Make sure no accessory remains inside the drum.
• Plug in the power cord just before operating the dryer.
• Do not block the air inlet hole of the cooling grill at the front of the dryer.
• Do not place inflammable objects near the dryer and keep the surroundings clean.
• Keep the dryer level with the ground.
• Do not remove the adjustable levelling legs of the dryer. They are necessary to
keep the dryer level with the ground.
DV5000T_DC68-04209F-02_EN.indd 27
English 27 
2021/8/12 16:19:18

Advertisement

Table of Contents
loading

Table of Contents