Film Advance Lever; Frame Counter - Nikon F3 Instruction Manual

Film advance lever
@
The film advance lever is specially contoured to fit the
thumb and is coaxial with the shutter release button.
It has a
30
0
stand-off with a throw of 140
0
and may be
operated in one complete stroke or a series of shorter ones .
Frame counter
@
To keep track of the number of exposed frames, the frame
counter is graduatea from two frames below 0 up to 40. 23
Blue numerals appear every 5 frames (0, 5, 10, etc.) with
dots in between. White marks at 12, 20, 24, and 36 indi-
cate the number of frames available on most film car-
tridges. When making blank shots with the shutter speed
dial set to "A," the shutter will fire at 1/S0 sec . until the
frame counter reaches "1." In addition, the LCD shows
SO in the finder. Or if you set the dial manually between
1/125 and 1/2000 sec . , the shutter will still fire at 1/S0 sec.
In the finder, an
"MSO"
is displayed . However, if the
speed is manually set to 1/S0 sec. (X) or below, the shutter
will fire at the speed set and the speed will be displayed
by the LCD. Therefore, to speed up film loading, set the
dial to "A" or to 1/S0 sec. (X) or above. "T" should not be
used when making blank shots as the shutter will remain
locked open.