Page 1
THANK YOU FOR BUYING A HOTPOINT PRODUCT. You can download the Safety Instructions and the User In order to receive a more complete assistance, please Manual, by visiting our website docs.hotpoint.eu and register your appliance on: www.hotpoint.eu/register following the Instructions on the back of this booklet.
Page 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER After installation, remove the stoppers from the racks and the retaining Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control elastic elements from the upper rack.
PROGRAMS TABLE Duration Water Energy Available of wash Program consumption consumption options program (litres/cycle) (kWh/cycle) (h:min) 1. Eco 50° 3:35 0.95 2. Intensive 65° 2:40 18.0 1.60 3. Mixed 55° 2:15 16.0 1.40 4. Fast Wash&Dry 50° 1:30 11.5 1.30 5.
Page 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. HALF LOAD TABLET (Tab) If there are not many dishes to be washed, a half load cycle may...
LOADING THE RACKS UPPER RACK LOWER RACK Load delicate and light dishes: For pots, lids, plates, salad bowls, glasses, cups, saucers, low salad cutlery etc. Large plates and lids bowls. should ideally be placed at the sides to avoid interferences with the spray arm.
DAILY USE 1. CHECK WATER CONNECTION The machine will switch off automatically during certain extended Check that the dishwasher is connected to the water supply and periods of inactivity, in order to minimise electricity consumption. If the crockery is only lightly soiled or if it has been rinsed with that the tap is open.
CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and On occasions, food residue may become encrusted onto the spray arms that the waste water flows away correctly. and block the holes used to spray the water.
Check water supply for leaks or other issues letting air inside. blinking rapidly Policy and standard documentation and additional product information can be found by: • Visiting our website: docs.hotpoint.eu and parts-selfservice.whirlpool.com • Using QR Code • Alternatively, contact our After-sales Service (See phone number in the warranty booklet).