Advanced Transmitter Features - Shure ULX-D Quad Manual

④ Low-Battery LED
◦ Off = More than 30 minutes of battery life remain
◦ On (red) = Less than 30 minutes of battery life remain
◦ On (green) = Microphone docked on charging station
◦ On (amber) = Battery is missing or is not inserted correctly
⑤ Infrared (IR) Port
Align with receiver IR port to send settings to transmitter.
⑥ Charge Connector
Connects to networked chargers and USB power supply.
⑦ Gooseneck Microphone
ULXD8 base fits 5", 10", and 15" Microflex series microphones, available in single or dualflex and with bi-color or red-only
LEDs.

Advanced Transmitter Features

RF MUTE
Use this to turn on a transmitter without interfering with the RF spectrum.
Press and hold exit during power-on until RF MUTED is displayed. To un-mute, restart the transmitter.
MIC.OFFSET
MIC.OFFSET compensates for signal level differences between transmitters that share the same receiver channel.
Set the offset gain on a low signal level transmitter to match a louder transmitter: UTILITY > MIC.OFFSET
Note: For normal gain adjustments, use the receiver gain buttons.
Transmitter Audio Mute Mode
Mute Mode reconfigures the transmitter power switch to act a mute switch for the audio. Using the switch, the audio can be
easily turned on or muted by presenters, sports referees, or anyone who periodically needs to speak. When the audio is muted,
the transmitter RF signal remains on and ready at all times.
Note: Mute Mode can be selected as an IR PRESET option.
To set a transmitter to Mute Mode:
1. From the transmitter menu: UTILITY > MUTE MODE
2. Use the arrows to select ON or OFF.
3. Press enter to save.
Tip: The transmitter LED turns red when audio is muted and turns green when audio is enabled. The display of the transmitter
will show AUDIO MUTED and the receiver display will show Tx Muted.
Note: Mute Mode must be set to OFF in order to use the power switch to turn off the transmitter.
Shure Incorporated
15/70